.gif)
.gif)
(205-710) FD35I Hoist
(205-451) single-phase power pack
(205-452) three-phase power pack
Hi-Lo Climbers combines a fast 35 feet per minute motor with the drive train found on the reliable FD-24 hoist. This allows the FD35I hoist to operate at the industry mandated maximum speed limit of 35 feet per minute. The FD35I hoist is designed to work with Hi-Lo Climber modular platforms as well as most straightboards.
Power requirement: 220 volt single phase or 220 volt three phase.
Dimensions: 24"W x 14"D 56" H. Weight 173 lb.
Speed is 35 feet per minute.
Rated 1000 lb./unit
The FD35I hoist is designed to work with a large variety of straight boards (platforms) up to 28 inches in width utilizing the included bottom plate assembly.
The FD35I will conveniently fold down onto the straightboard for transporting.
Bottom plate assembly dimensions: 32" W x 2" D x 6" to 10" H. Weight = 22 lbs.
| Back to Powered Hoist |
.jpg)
The FD35I is available with a 220 volt single phase motor or a 220 volt three phase motor each adjoined to a control box. This combination is known as the power package. The power package is mounted by six bolts allowing easy exchange to accommodate the available building power or customer preference
| Back to Powered Hoist |
.jpg)
Open Breech reeving is the fastest method of wire rope installation. Reeving can be done at any point along the wire rope. Reeving from the end of a wire rope is unnecessary with this system. Should a wire rope ever jam inside this unit, the operator can open the reeving mechanism and correct the problem without the safety exposure of cutting the wire rope.
| Back to Powered Hoist |
| spacer |